Floor sanding is basically the procedure of eliminating all the surfaces of a solid floor by carefully sanding using abrasive substances. These sanded surfaces are then marked with a pattern on the surface and are used as a reference point for the laying of new floors in the future. The process involves removal of old finish flooring, stripping of carpet, furniture coverings, painting, staining and any other kind of woodwork. It is important to perform this operation properly so that there is no damage to the floor beneath or above the marked out surfaces. The floor sanding also removes the loose scratches from the floors. This will ensure that there are no gaps between the flooring and will even out the grain structure of the floor.
What You Should Have Asked Your Teachers About Floor Sanding
There are different ways of performing floor sanding depending on the type of timber floor you have. When doing the first cut on the timber floor, use the best shear value you have. If you find that the amount of shear needed is more than you think is required, you will have to make adjustments in your cutting height until you get the results you desire.
When you have finished with the first cut, move along the floor a few inches at a time, being careful not to cut into any spaces. The next step involves the removal of the old floor padding and the old floor finish. The old floors must be removed before any sanding takes place. This is because the old floors have particles that can seriously affect the performance of the floor if they are accidentally moved during the sanding process. Once the old floors are out of the way, the job can proceed with sanding the remaining areas to the shear values that you want.